AddDet add detail AddGroup add group AddItemToGroup Add item to group AddPatternPiece add pattern piece %1 AddPiece add detail AddToCalc add object AddUnionDetails add union details CommunityPage Server שרת Server name/IP שם שרת/IP Secure connection Proxy settings Use Proxy Proxy address Proxy port Proxy user Proxy pass User settings User Name Save password Password Server name/IP: Proxy address: Proxy port: Proxy user: Proxy pass: User Name: Password: ConfigDialog Apply &Cancel &Ok Config Dialog Configuration Pattern Community Paths ConfigurationPage Setup user interface language updated and will be used the next time start Default unit updated and will be used the next pattern creation Save שמור Auto-save modified pattern min Interval: Language GUI language Decimal separator parts With OS options (%1) Default unit Centimeters סנטימטרים Millimiters מילימטר Inches Label language Send crash reports Send crash reports (recommended) After each crash Valentina collect information that may help us fix a problem. We do not collect any personal information. Find more about what <a href="https://bitbucket.org/dismine/valentina/wiki/manual/Crash_reports">kind of information</a> we collect. Pattern Editing Confirm item deletion Toolbar The text appears under the icon. (recommended for beginners.) GUI language: Decimal separator parts: Default unit: Label language: Pattern making system Pattern making system: Author: Book: The Default unit has been updated and will be used as the default for the next pattern you create. After each crash Valentina collects information that may help us fix the problem. We do not collect any personal information. Find more about what <a href="https://bitbucket.org/dismine/valentina/wiki/manual/Crash_reports">kind of information</a> we collect. The text appears under the icon (recommended for beginners). After each crash Valentina collects information that may help us fix the problem. We do not collect any personal information. Find more about what %1kind of information%2 we collect. DelGroup delete group DelTool delete tool DeleteDetail delete tool DeletePatternPiece delete pattern piece %1 DeletePiece delete tool Detail Fabric Lining Interfacing Interlining DialogAboutApp About Valentina Valentina version Contributors Built on %3 at %4 Web site : %1 Cannot open your default browser Build revision: Built on %1 at %2 Check For Updates DialogAboutTape About Tape Tape version Build revision: This program is part of Valentina project. Build revision: %1 Built on %3 at %4 Web site : %1 Cannot open your default browser Built on %1 at %2 Check For Updates DialogAlongLine Length אורך Value of length ערך האורך <html><head/><body><p>Show full calculation in message box</p></body></html> Point label תווית הנקודה First point נקודה ראשונה First point of line נקודה ראשונה בקו Second point נקודה שנייה Second point of line נקודה שנייה בקו Type of line סוג הקו Show line from first point to this point Select second point of line Point at distance along line Line color Edit length Length: Formula wizard Value Calculation Point label: First point: First point of the line Second point: Second point of the line Type of line: Line color: Unique label Choose unique label. DialogArc Arc Radius רדיוס Value of radius ערך הרדיוס <html><head/><body><p>Show full calculation in message box</p></body></html> First angle Value of first angle Second angle Value of second angle Center point נקודת מרכז Select point of center of arc Error Radius can't be negative Angles equal Color Edit radius Edit first angle Edit second angle Radius: Formula wizard Value Calulation First angle: Calculation Second angle: Center point: Select center point of the arc Color: Pen style: Approximation scale: Set approximation scale for this curve, 0 - use global value DialogArcWithLength Dialog Radius רדיוס Value of radius ערך הרדיוס <html><head/><body><p>Show full calculation in message box</p></body></html> First angle Value of first angle Length אורך Arc length Center point נקודת מרכז Select point of center of arc Color Edit radius Edit the first angle Edit the arc length Error Radius can't be negative Length can't be equal 0 Radius: Formula wizard Value Calculation First angle: Length: Center point: Color: Pen style: Approximation scale: Set approximation scale for this curve, 0 - use global value DialogBisector Length אורך Value of length ערך האורך <html><head/><body><p>Show full calculation in message box</p></body></html> Point label תווית הנקודה First point נקודה ראשונה First point of angle Second point נקודה שנייה Second point of angle Third point Third point of angle Type of line סוג הקו Show line from second point to this point Select second point of angle Select third point of angle Point along bisector Line color Edit length Length: Formula wizard Value Calculation Point label: Unique label Choose unique label. First point: Second point: Third point: Type of line: Line color: DialogCubicBezier Cubic bezier Color: Name: First point: Second point: Third point: Fourth point: Select the second point of curve Select the third point of curve Select the fourth point of curve Invalid spline Tool cubic bezier Pen Style: Approximation Scale: Set approximation scale for this curve, 0 - use global value DialogCubicBezierPath Dialog cubic bezier path Point: List of points Color: Name: Invalid spline path Tool cubic bezier path Pen style: Approximation scale: Set approximation scale for this curve, 0 - use global value DialogCurveIntersectAxis Angle Value of angle <html><head/><body><p>Show full calculation in message box</p></body></html> Axis point Curve עקומה Point label תווית הנקודה Type of line סוג הקו Show line from first point to this point Select axis point Point intersect curve and axis Axis Point Line color Edit angle Angle: Formula wizard Value Calculation Axis point: Curve: Point label: Unique label Choose unique label. Type of line: Line color: DialogCutArc Length אורך Value of length ערך האורך <html><head/><body><p>Show full calculation in message box</p></body></html> Arc Point label תווית הנקודה Segment an arc Selected arc Color Edit length Length: Formula wizard Value Calculation Arc: Point label: Unique label Choose unique label. Color: DialogCutSpline Length אורך Value of length ערך האורך <html><head/><body><p>Show full calculation in message box</p></body></html> Curve עקומה Selected curve Point label תווית הנקודה Segmenting a simple curve Color Edit length Length: Formula wizard Value Calculation Curve: Point label: Unique label Choose unique label. Color: DialogCutSplinePath Length אורך Value of length ערך האורך <html><head/><body><p>Show full calculation in message box</p></body></html> Curve עקומה Selected curve path Point label תווית הנקודה Segment a curved path Color Edit length Length: Formula wizard Value Calculation Curve: Point label: Unique label Choose unique label. Color: DialogDateTimeFormats Label date time editor Format: Insert a format <empty> DialogDetail Detail Bias X cm Bias Y Options אפשרויות Name of detail Seam allowance Width רוחב Closed Delete למחוק Got wrong scene object. Ignore. Reverse Seam allowance tool All objects in path should follow in clockwise direction. Scroll down the list ... ... Scroll up the list Ready! You need more points! First point can not equal the last point! You have double points! You have to choose points in a clockwise direction! Bias X: Bias Y: Name of detail: Width: First point cannot be equal to the last point! General Pattern piece data Material/Cut number/Placement Material type: Cut number: Placement: Add Cancel Remove Letter: Detail label visible Pattern label visible Fabric Lining Interfacing Interlining None Cut on fold Cut %1 of %2%3 on Fold Update on Fold You can choose one of the predefined materials or enter a new one Forbid piece be mirrored in a layout. Forbid flipping Letter of pattern piece Name can't be empty Grainline Grainline visible Rotation: Formula wizard Value Calculation <html><head/><body><p>Show full calculation in message box</p></body></html> Length: Infinite/undefined result Length should be positive Arrows: Both Just front Just rear DialogDuplicateDetail Dialog duplicate detail Click to place duplicate DialogEditLabel Edit label template Clear current and begin new label Import from label template Export label as template Edit Bold Font formating Italic Font formating Aligns with the left edge Centers horizontally in the available space Aligns with the right edge Additional font size. Use to make a line bigger. Text: Line of text Insert placeholders Preview <empty> Create new template Creating new template will overwrite the current, do you want to continue? Label template Export label template template Could not save file Import template Import template will overwrite the current, do you want to continue? File error. Date Time Pattern name Pattern number Company name or designer name Customer name Pattern extension Pattern file name Measurments file name Size Height Measurments extension Piece letter Piece annotation Piece orientation Piece rotation Piece tilt Piece fold position Piece name Quantity Material: Fabric Fabric Material: Lining Lining Material: Interfacing Interfacing Material: Interlining Interlining Word: Cut Cut Word: on fold on fold User material Insert… Move on top Move up Move down Move on bottom DialogEditWrongFormula Edit formula Formula Insert variable into formula Value of first angle <html><head/><body><p>Show full calculation in message box</p></body></html> Input data Size and height Measurements Increments Length of lines אורך הקווים Length of arcs Length of curves אורך העקומות Angle of lines Hide empty measurements Double click for add to formula Height Size Line length אורך הקו Arc length Curve length אורך העקומה Line Angle Radius of arcs Angles of arcs Angles of curves Arc radius Arc angle Curve angle Formula: Value Calculation Name Full name Functions Lengths to control points Filter list by keyword Preview calculations DialogEllipticalArc Dialog Radius1: Formula wizard Value Calulation <html><head/><body><p>Show full calculation in message box</p></body></html> Radius2: First angle: Calculation Second angle: Rotation angle: Center point: Select center point of the arc Color: Error Radius can't be negative Angles equal Edit radius1 Edit radius2 Edit first angle Edit second angle Edit rotation angle Elliptical arc Pen style: DialogEndLine Length אורך Value of length ערך האורך <html><head/><body><p>Show full calculation in message box</p></body></html> Angle Value of angle Base point First point of line נקודה ראשונה בשורה Point label תווית הנקודה Type of line סוג הקו Show line from first point to this point Point at distance and angle Line color Edit angle Edit length Length: Formula wizard Value Calculation Angle: Base point: Point label: Unique label Choose unique label. Type of line: Line color: DialogExportToCSV Export options Export With header Codec: Separator Tab Comma Semicolon Space Options אפשרויות Preview Global Options DialogFinalMeasurements Final measurements Find: Search Name The calculated value Formula Details Name: Calculated value: Formula: Calculation <html><head/><body><p>Show full calculation in message box</p></body></html> Formula wizard Description: Move measurement up Move measurement down measurement Error Empty field. Edit measurement Empty field Invalid result. Value is infinite or NaN. Please, check your calculations. Value Parser error: %1 DialogFlippingByAxis Dialog Origin point: Suffix: Axis type: Select origin point Select origin point that is not part of the list of objects Vertical axis Horizontal axis Flipping by axis DialogFlippingByLine Dialog First line point: Suffix: Second line point: Select first line point Select first line point that is not part of the list of objects Select second line point Select second line point that is not part of the list of objects Flipping by line DialogGroup Group Group name: Unique pattern piece name Choose group name New group DialogHeight Point label תווית הנקודה Base point First point of line נקודה ראשונה בשורה Second point of line נקודה שנייה בשורה Type of line סוג הקו Show line from first point to our point Select first point of line לבחור נקודה ראשונה Select second point of line Perpendicular point along line Base Point Line color Point label: Unique label Choose unique label. Base point: First point of line: Second point of line: Type of line: Line color: DialogHistory History Tool כלי Can't create record. %1 - Base point %1_%2 - Line from point %1 to point %2 %3 - Point along line %1_%2 %1 - Point of shoulder %3 - normal to line %1_%2 %4 - bisector of angle %1_%2_%3 %5 - intersection of lines %1_%2 and %3_%4 Curve %1_%2 Arc with center in point %1 Curve point %1 %4 - point of contact of arc with the center in point %1 and line %2_%3 Point of perpendicular from point %1 to line %2_%3 Triangle: axis %1_%2, points %3 and %4 %1 - point of intersection %2 and %3 %1 - cut arc with center %2 %1 - cut curve %2_%3 %1 - cut curve path %2 %1 - point of intersection line %2_%3 and axis through point %4 %1 - point of intersection curve and axis through point %2 Arc with center in point %1 and length %2 %1 - point of arcs intersection %1 - point of circles intersection %1 - point from circle and tangent %1 - point from arc and tangent Correction the dart %1_%2_%3 %1 - point of curves intersection Curve Cubic bezier curve Arc %1 with length %2 Spline path Cubic bezier curve path %1 - cut %2 arc curve curve path Elliptical arc DialogIncrements Increments Name The calculated value הערך המחושב Lines קווים Line קו Length אורך Curve עקומה Arc Tables of Variables Lines angles Angle Lengths curves Angles curves Lengths arcs Radiuses arcs Radius רדיוס Angles arcs Formula Details Move measurement up Move measurement down Name: Calculated value: Formula: <html><head/><body><p>Show full calculation in message box</p></body></html> Description: Error Empty field. Empty field Value Parser error: %1 Increment_%1 Edit increment Unique increment name Calculation Formula wizard Invalid value Find: Search Curves control point lengths Invalid result. Value is infinite or NaN. Please, check your calculations. Refresh a pattern with all changes you made Refresh Preview calculations Unique variable name DialogInsertNode Insert node Item: Piece: Uknown DialogKnownMaterials Known materials Material: Name of material User material DialogLayoutProgress Couldn't prepare data for creation layout Several workpieces left not arranged, but none of them match for paper Create a Layout <html><head/><body><p>Finding best position for worpieces. Please, wait.</p></body></html> Arranged workpieces: %1 from %2 <html><head/><body><p>Finding best position for workpieces. Please, wait.</p></body></html> One or more pattern pieces are bigger than the paper format you selected. Please, select a bigger paper format. DialogLayoutSettings Paper size Templates: Width: Height: Rotate workpiece Rotate by degree Creation options Shift length: Principle of choosing the next workpiece Three groups: big, middle, small Two groups: big, small Descending area Millimiters מילימטר Centimeters סנטימטרים Inches Pixels Create a layout Auto crop unused length Unite pages (if possible) Gap width: Save length of the sheet Letter Legal Roll 24in Roll 30in Roll 36in Roll 42in Roll 44in Three groups: big, middle, small = 0 Two groups: big, small = 1 Descending area = 2 Paper format Fields Left: Right: Top: Bottom: Ignore fileds Custom Wrong fields. Fields go beyond printing. Apply settings anyway? Three groups: big, middle, small = 0; Two groups: big, small = 1; Descending area = 2 Layout options Shift/Offset length: Rule for choosing the next workpiece Enabling for sheets that have big height will speed up creating. Divide into strips Multiplier Set multiplier for length of the biggest workpiece in layout. x Enabling for sheets that have big height will speed up creating. Printer: None Printer Text Text will be converted to paths Export text as paths Margins Ignore margins Margins go beyond printing. Apply settings anyway? DialogLine First point נקודה ראשונה Second point נקודה שנייה Type of line סוג הקו Show line from first point to this point Select second point לבחור נקודה שנייה Line between points Line color First point: Second point: Type of line: Line color: DialogLineIntersect Point label תווית הנקודה First line First point נקודה ראשונה Second point נקודה שנייה Second line Select second point of first line Select first point of second line Select second point of second line Point at line intersection Point label: Unique label Choose unique label. First point: Second point: DialogLineIntersectAxis Angle Value of angle <html><head/><body><p>Show full calculation in message box</p></body></html> Axis point First point of line נקודה ראשונה בשורה First line point Second line point Point label תווית הנקודה Type of line סוג הקו Show line from first point to this point Select second point of line Select axis point Point intersect line and axis Axis Point Second point of line נקודה שנייה בשורה Line color Edit angle Angle: Formula wizard Value Calculation Axis point: First line point: Second line point: Point label: Unique label Choose unique label. Type of line: Line color: DialogMDataBase Measurement data base Measurements Direct Height Measurement section Direct Width Measurement section Indentation Measurement section Circumference and Arc Measurement section Vertical Measurement section Horizontal Measurement section Bust Measurement section Balance Measurement section Arm Measurement section Leg Measurement section Crotch and Rise Measurement section Hand Measurement section Foot Measurement section Head Measurement section Men & Tailoring Measurement section Historical & Specialty Measurement section Patternmaking measurements Measurement section Collapse All Expand All Check all Uncheck all Search: Search Select measurement DialogMove Dialog Angle: Formula wizard Value <html><head/><body><p>Show full calculation in message box</p></body></html> Length: Suffix: Edit angle Edit length Calculation Move Rotation angle: Edit rotation angle Rotation origin point: Center point נקודת מרכז DialogNewMeasurements New measurement file Measurement type: Unit: Base size: Base height: Individual Standard Centimeters סנטימטרים Millimiters מילימטר Inches Multisize DialogNewPattern Individual measurements Pattern piece name Units: Centimeters סנטימטרים Millimiters מילימטר Inches Pattern piece name: Unique pattern piece name Choose unique pattern piece name. New pattern DialogNormal Length אורך Value of length ערך האורך <html><head/><body><p>Show full calculation in message box</p></body></html> Point label תווית הנקודה First point נקודה ראשונה Second point נקודה שנייה Additional angle degrees Type of line סוג הקו Show line from first point to this point Select second point of line Point along perpendicular First point of line נקודה ראשונה בשורה Second point of line נקודה שנייה בשורה Line color Edit length Length: Formula wizard Value Calculation Point label: Unique label Choose unique label. First point: Second point: Additional angle degrees: Type of line: Line color: DialogPatternMaterials Dialog Placeholder Value DialogPatternProperties Pattern properties Description Author name Pattern description For technical notes. Heights and Sizes All heights (cm) All sizes (cm) Default height and size From standard measurements Custom Height: Size: Security Open only for read Call context menu for edit No image Delete image Change image Save image to file Show image Image for pattern Images (*.png *.jpg *.jpeg *.bmp) Images Save File untitled Path: Show in Explorer <Empty> File was not saved yet. Show in Finder General info Pattern name: Pattern number: Company/Designer name: Customer name: Created: Pattern size: Show measurements Show date of creation Use %1 and %2 to insert pattern size and height Show date of layout creation (%1) Show measurements file From multisize measurements Pattern For technical notes Label data Label template: Edit pattern label Edit template Date format: Time format: Save label data. Label data were changed. Do you want to save them before editing label template? Materials Pattern materials: Manage list of pattern materials Manage The customer name from individual measurements DialogPatternXmlEdit XML Editor Value : Name : <No selection> Type : Add attribute Add son Remove attribute Remove node Set Cancel Apply changes Undo last Immediate apply Base selection All pattern pieces No changes Cannot delete previously created node No changes left Cannot undo change <no value> Unchanged Cannot delete previously created attribute Node Name Name: Node Value (may be empty) Value: Attribute Name Attribute Value No selection Root node Node Attribute Immediately apply Type: Type: DialogPiecePath Piece path tool Path Name: Unnamed path Create name for your path Type: Piece: Type of pen: Ready! Seam allowance Width: Formula wizard Value Calculation <html><head/><body><p>Show full calculation in message box</p></body></html> Nodes Node: Before: Return to default width Default After: Angle: Select main path objects, <b>Shift</b> - reverse direction curve, <b>Enter</b> - finish creation Reverse Delete Current seam aloowance Edit seam allowance width Edit seam allowance width before Edit seam allowance width after Internal path Custom seam allowance You need more points! First point of <b>custom seam allowance</b> cannot be equal to the last point! You have double points! Passmarks Passmark: Lines One line Two lines Three lines Angle Straightforward Bisector Passmark Marks T mark V mark Please, select a detail to insert into! List of details is empty! Select if need designate the corner point as a passmark Intersection Each point in the <b>custom seam allowance</b> path must be unique! The path is a cut contour Cut on fabric Select if need designate the corner point as a passmark. Show only left passmark. Intersection (only left) Select if need designate the corner point as a passmark. Show only right passmark. Intersection (only right) Control Visible Create a formula that regulates visibility. Values different from "0" make a path visible. 1 Control visibility Intersection 2 Intersection 2 (only left) Intersection 2 (only right) Check uniqueness Move on top Move up Move down Move on bottom DialogPin Dialog Pin tool Point: Piece: Pin DialogPlaceLabel Dialog Width: Formula wizard Value Calculation <html><head/><body><p>Show full calculation in message box</p></body></html> Height: Angle: 0 Point: Piece: Type: Edit rectangle width Edit angle Segment Rectangle Cross T-shaped Doubletree Corner Triangle H-shaped Button DialogPointFromArcAndTangent Point from arc and tangent Point label תווית הנקודה Tangent point Arc Select point of center of arc Take Select an arc Point label: Unique label Choose unique label. Tangent point: Arc: Take: DialogPointFromCircleAndTangent Point from circle and tangent Radius רדיוס <html><head/><body><p>Show full calculation in message box</p></body></html> Point label תווית הנקודה Center of the circle Select point of center of arc Tangent point Take Select a circle center Edit radius Error Radius can't be negative Radius: Formula wizard Value Calculation Point label: Unique label Choose unique label. Center of the circle: Tangent point: Take: DialogPointOfContact Radius רדיוס Value of radius ערך הרדיוס <html><head/><body><p>Show full calculation in message box</p></body></html> Point label תווית הנקודה Center of arc Select point of center of arc Top of the line End of the line Select second point of line Point at intersection of arc and line Edit radius Radius: Formula wizard Value Calculation Point label: Unique label Choose unique label. Center of arc: Top of the line: End of the line: DialogPointOfIntersection Point label תווית הנקודה First point of angle Second point of angle Point from X and Y of two other points X: vertical point Y: horizontal point Select point for Y value (horizontal) Point label: Unique label Choose unique label. X: vertical point: Y: horizontal point: DialogPointOfIntersectionArcs Dialog Point label תווית הנקודה First arc Selected arc Second arc Take Select second an arc Point label: Unique label Choose unique label. First arc: Second arc: Take: Tool point of intersetion arcs DialogPointOfIntersectionCircles Dialog Radius of the first circle <html><head/><body><p>Show full calculation in message box</p></body></html> Radius of the second circle Point label תווית הנקודה Center of the first circle Select point of center of arc Center of the second circle Take Select second circle center Edit first circle radius Edit second circle radius Error Radius can't be negative Radius of the first circle: Formula wizard Value Calculation Radius of the second circle: Point label: Unique label Choose unique label. Center of the first circle: Center of the second circle: Take: Tool point of intersection circles DialogPointOfIntersectionCurves Tool point of intersection curves First curve: Second curve: Point label: Unique label Choose unique label. Vertical correction: Horizontal correction: Select second curve DialogPreferences Preferences Configuration Pattern Paths Followed %n option(s) require restart to take effect: %1. DialogRotation Rotation Angle: Formula wizard Value Calulation <html><head/><body><p>Show full calculation in message box</p></body></html> Origin Point: Suffix: Edit angle Select origin point Select origin point that is not part of the list of objects Calculation DialogSaveLAyout Save Layout File name: Path: File format: Browse... TextLabel Destination folder Path to destination folder. Select path to destination folder File base name File base name. File base name. Path to destination folder Binary form Text as paths Margins Right: Left: Top: Bottom: Paper format ... Browse… cm Templates: Orientation: DialogSaveLayout Name conflict Folder already contain file with name %1. Rewrite all conflict file names? Example: Select folder Svg files (*.svg) PDF files (*.pdf) Images (*.png) Wavefront OBJ (*.obj) PS files (*.ps) EPS files (*.eps) DXF files (*.dxf) Tried to use out of range format number. Selected not present format. The base filename has not match regular expression. The destination directory doesn't exists or is not readable. The base filename does not match a regular expression. files (flat) files Image files DialogSeamAllowance Seam allowance tool All objects in path should follow in clockwise direction. Forbid piece be mirrored in a layout. Forbid flipping Ready! Seam allowance Width: Formula wizard Value Calculation <html><head/><body><p>Show full calculation in message box</p></body></html> Default Angle: Custom Pattern piece data Letter: Letter of pattern piece Name of detail: Detail Name can't be empty Material/Cut number/Placement Cut number: Material type: You can choose one of the predefined materials or enter a new one Placement: Add Cancel Remove Detail label visible Pattern label visible Grainline Grainline visible Rotation: Length: Arrows: Select main path objects clockwise, <b>Shift</b> - reverse direction curve, <b>Enter</b> - finish creation Cut %1 of %2%3 on Fold Reverse Delete Options Error. Can't save piece path. Infinite/undefined result Length should be positive Parser error: %1 Update Current seam allowance Edit seam allowance width Edit seam allowance width before Edit seam allowance width after You need more points! You have to choose points in a clockwise direction! First point cannot be equal to the last point! You have double points! Empty main path custom seam allowance None Cut on fold Both Just front Just rear Pins no pin Labels Height: Error Edit length Edit angle Edit height Edit width Paths Excluded Passmark Each point in the path must be unique! Passmarks To open all detail's features complete creating the main path. Workpiece tool Segment Rectangle Cross T-shaped Doubletree Corner Triangle H-shaped Button Place label Check uniqueness DialogShoulderPoint Length אורך Value of length ערך האורך <html><head/><body><p>Show full calculation in message box</p></body></html> Point label תווית הנקודה First point נקודה ראשונה Second point נקודה שנייה Third point Type of line סוג הקו Show line from first point to our point Select first point of line לבחור נקודה ראשונה Select second point of line Special point on shoulder Line color Edit length Length: Formula wizard Value Calculation Point label: Unique label Choose unique label. First point: Second point: Third point: Type of line: Line color: DialogSinglePoint Single point Coordinates on the sheet Coordinates Y coordinate X coordinate Point label תווית הנקודה Unique label Choose unique label. DialogSpline First point נקודה ראשונה Length ratio of the first control point The angle of the first control point Second point נקודה שנייה Length ratio of the second control point The angle of the second control point Coefficient of curvature of the curve Select last point of curve Simple curve Color Coefficient of curvature of the curve: Color: First point: Control point Angle: Length ratio: Second point: Name: Invalid spline Length: Formula wizard Value Calulation <html><head/><body><p>Show full calculation in message box</p></body></html> Edit first control point angle Edit second control point angle Edit first control point length Edit second control point length Error Length can't be negative Calculation Pen style: Approximation scale: Set approximation scale for this curve, 0 - use global value DialogSplinePath Curved path Point of curve Length ratio of the first control point The angle of the first control point Length ratio of the second control point The angle of the second control point List of points Coefficient of curvature of the curve Select point of curve path Color Coefficient of curvature of the curve: Color: Point: First control point Angle: Length ratio: Second control point Name: Invalid spline path Length: Formula wizard Value Calulation <html><head/><body><p>Show full calculation in message box</p></body></html> Edit first control point angle Edit second control point angle Edit first control point length Edit second control point length Error Length can't be negative Not used Calculation Pen style: Approximation scale: Set approximation scale for this curve, 0 - use global value DialogTapePreferences Preferences Configuration Paths DialogTool Error Empty field Value can't be 0 Value Parser error: %1 First point נקודה ראשונה Second point נקודה שנייה Highest point Lowest point Leftmost point Rightmost point Invalid value by length by points intersetions by first edge symmetry by second edge symmetry by first edge right angle by second edge right angle Invalid result. Value is infinite or NaN. Please, check your calculations. Value can't be less than 0 DialogTriangle Point label תווית הנקודה First point of axis First point of line נקודה ראשונה בשורה Second point of axis First point נקודה ראשונה Second point נקודה שנייה Select second point of axis Select first point לבחור נקודה ראשונה Select second point לבחור נקודה שנייה Triangle tool First point of the axis Second point of the axis Second point of line נקודה שנייה בשורה Point label: Unique label Choose unique label. First point of axis: Second point of axis: First point: Second point: DialogTrueDarts True darts First base point First point of angle Second base point Second point of angle First dart point Third point of angle Second dart point Show line from second point to this point Third dart point First new dart point Second new dart point Select the second base point Select the first dart point Select the second dart point Select the third dart point First base point: Second base point: First dart point: Second dart point: Third dart point: First new dart point: Unique label Choose unique label. Second new dart point: DialogUndo Broken formula Error while calculation formula. You can try undo last operation or fix broken formula. &Undo &Fix formula &Cancel Error while calculation formula. You can try to undo last operation or fix broken formula. DialogUnionDetails <html><head/><body><p>Do you really want union details?</p></body></html> Union tool Select a first point Workpiece should have at least two points and three objects Select a second point Select a unique point Select a detail Select a point on edge <html><head/><body><p>Do you really want to unite details?</p></body></html> Retain original pieces FvUpdateWindow Software Update A new version of %1 is available! %1 %2 is now available - you have %3. Would you like to download it now? Skip This Version Remind Me Later Get Update %1 update is available! FvUpdater Cannot open your default browser. Feed download failed: %1. Feed parsing failed: %1 %2. No updates were found. Feed error: invalid "enclosure" with the download link Error Information InternalStrings The program is provided AS IS with NO WARRANTY OF ANY KIND, INCLUDING THE WARRANTY OF DESIGN, MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. MApplication Error parsing file. Program will be terminated. Error bad id. Program will be terminated. Error can't convert value. Program will be terminated. Error empty parameter. Program will be terminated. Error wrong id. Program will be terminated. Something's wrong!! Parser error: %1. Program will be terminated. Exception thrown: %1. Program will be terminated. Valentina's measurements editor. The measurement file. The base height The base size Set pattern file unit: cm, mm, inch. The pattern unit Use for unit testing. Run the program and open a file without showing a window. Invalid base size argument. Must be cm, mm or inch. Can't begin to listen for incoming connections on name '%1' Test mode doesn't support openning several files. Please, provide one input file. Open with the base size. Valid values: %1cm. Invalid base height argument. Must be %1cm. Invalid base size argument. Must be %1cm. Open with the base height. Valid values: %1cm. Use for unit testing. Run the program and open a file without showing the main window. Disable high dpi scaling. Call this option if has problem with scaling (by default scaling enabled). Alternatively you can use the %1 environment variable. MainWindow Valentina ולנטינה Tools for creating points. Point נקודה Point along perpendicular Perpendicular point along line Point along bisector Point at distance and angle Point at distance along line Tools for creating lines. כלים ליצירת קווים. Line קו Line between points Point at line intersection Tools for creating curves. Curve עקומה Tools for creating arcs. Arc Tools for creating details. Detail &File &Help &Pattern piece Measurements Window Toolbar files ToolBar modes Toolbar pattern Toolbar options Toolbar tools Tool options New חדש &New Create a new pattern יצירת תבנית חדשה Open &Open Open file with pattern Save שמור &Save Save pattern שמירת תבנית Save &As... Save not yet saved pattern Draw Details Pointer tools New pattern piece Add new pattern piece Change the label of pattern piece Table of variables Tables of variables History About &Qt &About Valentina E&xit Exit the application Preferences Pattern properties Zoom in zoom in Zoom out Edit pattern XML code Original zoom Original Zoom Zoom fit best Stop Stop using tool Repot Bug... Report bug Close window Online help Show online help Pattern piece %1 Select point Select first point לבחור נקודה ראשונה Select first point of line לבחור נקודה ראשונה Select first point of angle Select first point of first line Select first point curve Select simple curve Select point of center of arc Select point of curve path Select curve path Select points, arcs, curves clockwise. Select base point Select first point of axis Select detail Select arc Select curve About Qt Height: Size: Pattern Piece: Pattern files (*.val) pattern Save as שמירה בשם Could not save file Open file Error parsing file. Error can't convert value. Error empty parameter. שגיאה חסר פרמטר. Error wrong id. Error parsing file (std::bad_alloc). Bad id. File saved untitled.val The pattern has been modified. Do you want to save your changes? &Undo &Redo Pattern piece: Enter a new label for the pattern piece. This file already opened in another window. Wrong units. Application doesn't support standard table with inches. File error. File loaded Valentina didn't shut down correctly. Do you want reopen files (%1) you had open? Reopen files. Standard measurements (*.vst) Individual measurements (*.vit) Special point on shoulder Triangle tool Point at intersection of arc and line Point from X and Y of two other points Point intersect line and axis Simple curve Curved path Segmenting a simple curve Segment a curved path Point intersect curve and axis Segment an arc Point intersect arc and axis Seam allowance tool Union tool toolBar Last Tool Activate last used tool again Select point for X value (vertical) Mode Pointer Config pattern piece Layout Show Curve Details Show/hide control points and curve direction Tools Point of intersection arcs Point of intersection circles Point from circle and tangent Point from arc and tangent Arc with given length Settings Layout pages Save as PDF Save original layout Save as tiled PDF Split and save a layout into smaller pages Print Print tiled PDF Split and print a layout into smaller pages (for regular printers) Print preview Print preview original layout Export As... Export original layout Select first an arc Select first circle center Select point on tangent Select point of the center of the arc Select the first base line point Detail mode You can't use now the Detail mode. Please, create at least one workpiece. Layout mode You can't use now the Layout mode. Please, create at least one workpiece. Unsaved changes Load Individual ... Load Standard ... Show ... Show measurements Sync measurements Individual measurements (*.vit);;Standard measurements (*.vst) Measurements loaded Standard measurements (*.vst);;Individual measurements (*.vit) You can't export empty scene. Create new Layout Create/Edit Create/edit measurements %1, %2 (%3) Coords in status line: "X, Y (units)" Failed to lock. This file already opened in another window. Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. Measurement file contains invalid known measurement(s). Measurement file has unknown format. Measurement file doesn't include all required measurements. Please, additionaly provide: %1 Measurement files types have not match. Measurements was synced Couldn't sync measurements. Couldn't update measurements. The measurements file '%1' could not be found. The measurements file <br/><br/> <b>%1</b> <br/><br/> could not be found. Do you want to update the file location Loading measurements file Not supported size value '%1' for this pattern file. Couldn't set size. Need a file with standard measurements. Couldn't set size. File wasn't opened. The method %1 does nothing in GUI mode Not supported height value '%1' for this pattern file. Couldn't set height. Need a file with standard measurements. Couldn't set height. File wasn't opened. Export error. Please, provide one input file. Print an original layout Preview tiled PDF Print preview tiled layout <html><head/><body><p>Mode for working with pattern pieces. These pattern pieces are base for going to the next stage &quot;Details mode&quot;. Before you will be able to enable the &quot;Details mode&quot; need create at least one detail.</p></body></html> <html><head/><body><p>Mode for working with details. Before you will be able to enable the &quot;Details mode&quot; need create at least one detail on the stage &quot;Draw mode&quot;. Details created on this stage will be used for creating a layout. </p></body></html> <html><head/><body><p>Mode for creating a layout of details. This mode avaliable if was created at least one detail on the stage &quot;Details mode&quot;. The layout can be exported to your prefered file format and saved to your harddirve.</p></body></html> Unload measurements Unload measurements if they was not used in a pattern file. Measurements unloaded Couldn't unload measurements. Some of them are used in the pattern. True darts New pattern Open pattern Create/Edit measurements Save... Don't Save Locking file This file already opened in another window. Ignore if you want to continue (not recommended, can cause a data corruption). The lock file could not be created, for lack of permissions. Ignore if you want to continue (not recommended, can cause a data corruption). Unknown error happened, for instance a full partition prevented writing out the lock file. Ignore if you want to continue (not recommended, can cause a data corruption). The lock file could not be created, for lack of permissions. Unknown error happened, for instance a full partition prevented writing out the lock file. Report Bug... Point intersection curves Select first curve (read only) Measurements was changed. Do you want to sync measurements now? Curve tool which uses point as control handle Select first curve point Select point of cubic bezier path Toolbar pointer Operations Create new group Groups Select one or more objects, <b>Enter</b> - finish creation Rotate objects Close pattern Select one or more objects, <b>Enter</b> - confirm selection Tool pointer Midpoint between two points Group Contains all visibility groups Show which details will go in layout You can't use now the Layout mode. Please, include at least one detail in layout. Original zoom Select first circle center Select point on tangent Pattern Piece: Height: Size: The measurements file <br/><br/> <b>%1</b> <br/><br/> could not be found. Do you want to update the file location? Flipping objects by line Flipping objects by axis Move objects Measurements were changed. Do you want to sync measurements now? Gradation doesn't support inches Measurements have been synced Tools for creating elliptical arcs. Elliptical Arc Select point of center of elliptical arc Select main path objects clockwise. Select path objects, <b>Shift</b> - reverse direction curve The document has no write permissions. Cannot set permissions for %1 to writable. Could not save the file. Could not save the file read only Variables Table Contains information about increments and internal variables Load Individual Load Individual measurements file Load Multisize Load multisize measurements file Open Tape Edit Current Edit linked to the pattern measurements Sync Synchronize linked to the pattern measurements after change Unload Current Unload measurements if they were not used in a pattern file Individual measurements Multisize measurements Pattern files Pin tool Select pin point Insert node tool Select an item to insert Forum Select one or more objects, hold <b>%1</b> - for multiple selection, <b>Enter</b> - finish creation Select one or more objects, hold <b>%1</b> - for multiple selection, <b>Enter</b> - confirm selection Open Tape app for creating or editing measurements file Export increments to CSV Name The calculated value Formula You can't use Detail mode yet. Please, create at least one workpiece. You can't use Layout mode yet. Please, create at least one workpiece. You can't use Layout mode yet. Please, include at least one detail in layout. You can't use Layout mode yet. Zoom fit best current zoom fit best current pattern piece Export details skiping the Layout stage Application doesn't support multisize table with inches. You don't have enough details to export. Please, include at least one detail in layout. Export details Can't export details. Couldn't set size. Need a file with multisize measurements. Couldn't set height. Need a file with multisize measurements. Please, additionally provide: %1 Label template editor Workpiece tool Internal path tool Save &As… Report Bug… Export As… Save… Final measurements Export Final Measurements to CSV You can't export empty scene. Please, include at least one detail in layout. Export final measurements error. Destination path is empty. Next pattern piece Ctrl+PgDown Previous pattern piece Ctrl+PgUp Point from tangent circle and segment Place label tool Duplicate detail tool Select placelabel center point The measurements file '%1' could not be found or provides not enough information. Use these tools to create a pattern Scale: Create new pattern piece to start working. Changes applied. MainWindowsNoGUI For saving multypage document all sheet should have the same size. Use export function instead. For previewing multypage document all sheet should have the same size. For printing multypages document all sheet should have the same size. Creating file '%1' failed! %2 Critical error! Print to pdf PDF file (*.pdf) Print error Cannot proceed because there are no available printers in your system. unnamed The layout is stale. The layout was not updated since last pattern modification. Do you want to continue? Couldn't prepare data for creation layout Several workpieces left not arranged, but none of them match for paper Can't open printer %1 Export error. For saving multipage document all sheet should have the same size. Use export function instead. For previewing multipage document all sheet should have the same size. For printing multipages document all sheet should have the same size. Pages will be cropped because they do not fit printer paper size. Can't create path Cannot set printer margins Can't create a path Pattern Name Value Export final measurements error. Value in line %1 is infinite or NaN. Please, check your calculations. Parser error at line %1: %2. File error %1. One or more pattern pieces are bigger than the paper format you selected. Please, select a bigger paper format. Description MoveDoubleLabel move the first dart label move the second dart label MoveLabel move point label MoveSPoint move single point MoveSpline move spline MoveSplinePath move spline path OperationMoveLabel move point label OperationShowLabel toggle label PathPage Open Directory Path that use Valentina Default Edit Type Path Individual measurements Patterns Standard measurements Layout Templates PatternPage User User name Graphical output Use antialiasing Undo Count steps (0 - no limit) User name: Count steps (0 - no limit): All user defined materials have been deleted! User defined materials Delete all Workpiece Forbid flipping By default forbid flipping for all workpieces By default forbid flipping for all new created workpieces PreferencesConfigurationPage Save Auto-save modified pattern Interval: min Language GUI language: Decimal separator parts: Default unit: Label language: Pattern making system Pattern making system: Author: Book: Send crash reports Send crash reports (recommended) Pattern editing Reset warnings Toolbar The text appears under the icon (recommended for beginners). With OS options After each crash Valentina collects information that may help us fix the problem. We do not collect any personal information. Find more about what %1kind of information%2 we collect. The Default unit has been updated and will be used as the default for the next pattern you create. Centimeters Millimiters Inches Update a pattern only after a curve release Free curve mode default unit General Double click calls Zoom fit best for current pattern piece Scrolling Animation Duration: Scrolling animation duration ms milliseconds Update interval: Time in milliseconds between each animation update Mouse scale Sensor: sensor mouse Scale scrolling sensitivity for mouse with sensor Wheel: mouse wheel Scale scrolling sensitivity for mouse with wheel Acceleration: PreferencesPathPage Paths that Valentina uses Type Path Default Edit Open Directory My Individual Measurements My Multisize Measurements My Patterns My Layouts My Templates My label templates PreferencesPatternPage User User name: Graphical output Use antialiasing Undo Count steps (0 - no limit): User defined materials Delete all Workpiece Forbid flipping Show a passmark both in the seam allowance and on the seam line. Show second passmark on seam line All user defined materials have been deleted! By default forbid flipping for all new created workpieces By default hide the main path if the seam allowance was enabled Hide main path Label font: Seam allowance Default value: Label data/time format Date: Edit formats Time: Materials Known materials: Manage list of known materials Manage When manage pattern materials save them to known materials list Remeber pattern materials Curve approximation: Set default curve approximation scale Bold line width Line width: Millimiters מילימטר Inches Use OpenGL to render a scene. This option will take an affect after restart. Use OpenGL render antialiasing scene render QApplication The path to the measurments is already relative. The path to the measurments is already absolute. QCommandLineParser Displays version information. Displays this help. Unknown option '%1'. Unknown options: %1. Missing value after '%1'. Unexpected value after '%1'. [options] Usage: %1 Options: Arguments: QCoreApplication Based on Qt %1 (%2, %3 bit) QObject Create new pattern piece to start working. mm cm inch Property The text that appears in the first column header Value The text that appears in the second column header px add node move detail Changes applied. Wrong tag name '%1'. Can't convert toUInt parameter Can't convert toBool parameter Got empty parameter Can't convert toDouble parameter Got wrong parameter id. Need only id > 0. United detail Fabric Lining Interfacing Interlining Cut on fold Piece '%1' may broke a layout. Please, check seam allowance to check how seam allowance behave. Visibility trigger contains error and will be ignored QSaveFile Existing file %1 is not writable Writing canceled by application Partial write. Partition full? QmuParser too few arguments for function sum. parser error message too few arguments for function min. parser error message QmuParserErrorMsg Unexpected token "$TOK$" found at position $POS$. Math parser error messages. Left untouched "$TOK$" and $POS$ Internal error Math parser error messages. Invalid function-, variable- or constant name: "$TOK$". Math parser error messages. Left untouched "$TOK$" Invalid binary operator identifier: "$TOK$". Math parser error messages. Left untouched "$TOK$" Invalid infix operator identifier: "$TOK$". Math parser error messages. Left untouched "$TOK$" Invalid postfix operator identifier: "$TOK$". Math parser error messages. Left untouched "$TOK$" Invalid pointer to callback function. Math parser error messages. Expression is empty. Math parser error messages. Invalid pointer to variable. Math parser error messages. Unexpected operator "$TOK$" found at position $POS$ Math parser error messages. Left untouched "$TOK$" and $POS$ Unexpected end of expression at position $POS$ Math parser error messages. Left untouched $POS$ Unexpected argument separator at position $POS$ Math parser error messages. Left untouched $POS$ Unexpected parenthesis "$TOK$" at position $POS$ Math parser error messages. Left untouched "$TOK$" and $POS$ Unexpected function "$TOK$" at position $POS$ Math parser error messages. Left untouched "$TOK$" and $POS$ Unexpected value "$TOK$" found at position $POS$ Math parser error messages. Left untouched "$TOK$" and $POS$ Unexpected variable "$TOK$" found at position $POS$ Math parser error messages. Left untouched "$TOK$" and $POS$ Function arguments used without a function (position: $POS$) Math parser error messages. Left untouched $POS$ Missing parenthesis Math parser error messages. Too many parameters for function "$TOK$" at expression position $POS$ Math parser error messages. Left untouched "$TOK$" and $POS$ Too few parameters for function "$TOK$" at expression position $POS$ Math parser error messages. Left untouched "$TOK$" and $POS$ Divide by zero Math parser error messages. Domain error Math parser error messages. Name conflict Math parser error messages. Invalid value for operator priority (must be greater or equal to zero). Math parser error messages. user defined binary operator "$TOK$" conflicts with a built in operator. Math parser error messages. Left untouched "$TOK$" Unexpected string token found at position $POS$. Math parser error messages. Left untouched $POS$ Unterminated string starting at position $POS$. Math parser error messages. Left untouched $POS$ String function called with a non string type of argument. Math parser error messages. String value used where a numerical argument is expected. Math parser error messages. No suitable overload for operator "$TOK$" at position $POS$. Math parser error messages. Left untouched "$TOK$" and $POS$ Function result is a string. Math parser error messages. Parser error. Math parser error messages. Decimal separator is identic to function argument separator. Math parser error messages. The "$TOK$" operator must be preceeded by a closing bracket. Math parser error messages. Left untouched "$TOK$" If-then-else operator is missing an else clause Math parser error messages. Do not translate operator name. Misplaced colon at position $POS$ Math parser error messages. Left untouched $POS$ RemoveItemFromGroup Remove item from group RenamePP rename pattern piece RotationMoveLabel move point label SaveDetailOptions save detail option SavePieceOptions save detail option save detail options SavePiecePathOptions save path options SavePlaceLabelOptions save place label options SaveToolOptions save tool option ShowDoubleLabel toggle the first dart label togggle the second dart label ShowLabel toggle label TMainWindow <html><head/><body><p><span style=" font-size:18pt;">Select New for creation measurement file.</span></p></body></html> Name Calculated value Formula Base value In sizes In heights Details Name: Formula: <html><head/><body><p>Show full calculation in message box</p></body></html> Base value: In sizes: In heights: Description: Move measurement up Move measurement down Calculated value: Full name: Information Type: Measurement type Path: Path to file Show in Explorer Base size: Base size value Base height: Base height value Given name: Family name: Birth date: yyyy-MM-dd Email: Notes: File קובץ Window Help Measurements Menu Gradation Open individual ... Save שמור Save As ... Quit About &Qt About Tape New חדש Add known Add custom Read only Open standard ... Open template Database Show information about all known measurement Preferences untitled %1 This file already opened in another window. File error. Could not save file measurements Individual measurements (*.vit) Standard measurements (*.vst) Save as שמירה בשם &New Window Edit measurement M_%1 Error Empty field. Parser error: %1 Standard measurements Height: Size: Individual measurements untitled <Empty> Unsaved changes Measurements have been modified. Do you want to save your changes? Empty field Value Open file Import from a pattern Pattern files (*.val) Pattern unit: Find: Find Previous Ctrl+Shift+G Find Next Ctrl+G Individual measurements (*.vit);;Standard measurements (*.vst);;All files (*.*) Standard measurements (*.vst);;Individual measurements (*.vit);;All files (*.*) Measurements (*.vst *.vit);;All files (*.*) Failed to lock. This file already opened in another window. Failed to lock. This file already opened in another window. Expect collissions when run 2 copies of the program. File contains invalid known measurement(s). File has unknown format. Full name File '%1' doesn't exist! The name of known measurement forbidden to change. Can't find measurement '%1'. The base value of known measurement forbidden to change. The size increase value of known measurement forbidden to change. The height increase value of known measurement forbidden to change. The full name of known measurement forbidden to change. Name in formula Function Wizard Move measurement top Move measurement bottom Delete measurement unknown gender male gender female gender Gender: PM system: Create from existing ... Create from existing file Select file Export standard measurements not supported. Measurement diagram <html><head/><body><p><span style=" font-size:340pt;">?</span></p><p align=\"center\">Unknown measurement</p></body></html> <html><head/><body><p><span style=" font-size:340pt;">?</span></p><p align="center">Unknown measurement</p></body></html> About Qt File was not saved yet. Search Measurement's name in a formula Measurement's name in a formula. Measurement's human-readable name. Customer's name. Customer's family name. Customer's email address. Save... Don't Save Locking file This file already opened in another window. Ignore if you want to continue (not recommended, can cause a data corruption). The lock file could not be created, for lack of permissions. Ignore if you want to continue (not recommended, can cause a data corruption). Unknown error happened, for instance a full partition prevented writing out the lock file. Ignore if you want to continue (not recommended, can cause a data corruption). The lock file could not be created, for lack of permissions. Unknown error happened, for instance a full partition prevented writing out the lock file. Export to CSV Comma-Separated Values (*.cvs) Invalid value Show in Finder Comma-Separated Values Customer's name Customer's family name Customer's email address Height: Size: All files The measurements document has no write permissions. Cannot set permissions for %1 to writable. Could not save the file. Could not save the file read only Multisize measurements Invalid result. Value is infinite or NaN. Please, check your calculations. Empty Export from multisize measurements is not supported. Customer name: Open individual … Save As … Open multisize … Create from existing … Save… Import from CSV Measurement name in is empty. Merasurement '%1' doesn't match regex pattern. Merasurement '%1' already used in file. Measurement '%1' is not one of known measurements. Individual measurements require at least 2 columns. Error in row %1. Multisize measurements require at least 4 columns. Cannot convert base size value to double in column 2. Cannot convert height increase value to double in column 3. Cannot convert size increase value to double in column 4. Imported file must not contain the same name twice. Error in row %1. Measurement name is empty. TabGrainline Form Grainline visible Rotation: Formula wizard Value Calculation <html><head/><body><p>Show full calculation in message box</p></body></html> Length: Center pin: Top pin: Bottom pin: Arrows: TabLabels Form Piece label data Letter: Letter of pattern piece Name of detail: Detail Name can't be empty Material/Cut number/Placement Cut number: Material type: You can choose one of the predefined materials or enter a new one Placement: Add Cancel Remove Labels Detail label visible Width: Formula wizard Value Calculation <html><head/><body><p>Show full calculation in message box</p></body></html> Height: Center pin: Top left pin: Bottom right pin: Angle: Pattern label visible Label template: Edit template Label data Quantity: on fold Annotation: A text field to add comments in Orientation: Rotation: Tilt: Fold position: Edit piece label template Options to control position a detail label. <b>Not available if a detail label template is empty</b>. Options to control position a pattern label. <b>Not available if a pattern label template is empty</b>. TabPassmarks Form Passmark: Lines One line Two lines Three lines T mark V mark Angle Straightforward Bisector Marks Select if need designate the corner point as a passmark Intersection Show the second passmark on seam line This option has effect only if the second passmark on seam line enabled in global preferences. The option helps disable the second passmark for this passmark only. Select if need designate the corner point as a passmark. Show only left passmark. Intersection (only left) Select if need designate the corner point as a passmark. Show only right passmark. Intersection (only right) Intersection 2 Intersection 2 (only left) Intersection 2 (only right) TabPaths Form Main path All objects in path should follow in clockwise direction. Forbid piece be mirrored in a layout. Forbid flipping Ready! Seam allowance Automatic Width: Formula wizard Value Calculation <html><head/><body><p>Show full calculation in message box</p></body></html> Nodes Node: Before: Return to default width Default After: Angle: Custom Start point: End point: Include as: Internal paths The seam allowance is part of main path Built in Hide the main path if the seam allowance is enabled Hide main path Name of detail: Detail Name can't be empty Force piece to be always flipped in a layout. Force flipping Move on top Move up Move down Move on bottom TabPins Form TabPlaceLabels Dialog TapeConfigDialog Apply &Cancel &Ok Config Dialog Configuration Paths TapeConfigurationPage Language GUI language Pattern making system Author: Book: Decimal separator parts With OS options (%1) GUI language: Decimal separator parts: Pattern making system: Default height and size Default height: Default size: TapePathPage Open Directory Path that use Valentina Default Edit Type Path Individual measurements Standard measurements Templates TapePreferencesConfigurationPage Language GUI language: Decimal separator parts: Pattern making system Pattern making system: Author: Book: Measurements editing Reset warnings Toolbar The text appears under the icon (recommended for beginners). Default height and size Default height: Default size: With OS options TapePreferencesPathPage Paths that Valentina uses Type Path Default Edit Open Directory My Individual Measurements My Multisize Measurements My Templates ToggleDetailInLayout detail in layout list TogglePieceForbidFlipping forbid flipping TogglePieceForceFlipping force flipping TogglePieceInLayout detail in layout list Utils::CheckableMessageBox Do not ask again Do not &ask again Do not &show again VAbstractConverter Couldn't get version information. Too many tags <%1> in file. Version "%1" invalid. Version "0.0.0" invalid. Invalid version. Minimum supported version is %1 Invalid version. Maximum supported version is %1 Error no unique id. Could not change version. Error creating a backup file: %1. Error creating a reserv copy: %1. Unexpected version "%1". Error replacing a symlink by real file: %1. Error openning a temp file: %1. Invalid version. Minimum supported format version is %1 Invalid version. Maximum supported format version is %1 VAbstractCubicBezierPath Can't cut this spline VAbstractLayoutDialog Letter Legal Roll 24in Roll 30in Roll 36in Roll 42in Roll 44in Custom Roll 48in Roll 62in Roll 72in VAbstractOperation Label Length VAbstractPattern Can't find tool in table. Error creating or updating group New group measurement VAbstractPieceData Detail VAbstractSpline Length Label VAbstractTool black green blue dark red dark green dark blue yellow Confirm deletion Do you really want to delete? light salmon golden rod orange deep pink violet dark violet medium sea green lime deep sky blue corn flower blue Edit wrong formula goldenrod VApplication Error parsing file. Program will be terminated. Error bad id. Program will be terminated. Error can't convert value. Program will be terminated. Error empty parameter. Program will be terminated. Error wrong id. Program will be terminated. Something's wrong!! Parser error: %1. Program will be terminated. Exception thrown: %1. Program will be terminated. VComboBoxDelegate Select material VCommandLine Path to custom measure file (export mode). The measure file Number corresponding to output format (default = 0, export mode): Format number Number corresponding to page template (default = 0, export mode): Template number The page width The measure unit Rotation in degrees (one of predefined). Default (or 0) is no-rotate (export mode). Angle Auto crop unused length (export mode). Unite pages if possible (export mode). Save length of the sheet if set. (export mode). Layout units (as paper's one except px, export mode). The unit Shift layout length measured in layout units (export mode). Shift length Gap width x2, measured in layout units. (export mode). The gap width Sets layout groupping (export mode): Grouping type Cannot use pageformat and page explicit size/units together. Page height, width, units must be used all 3 at once. Invalid rotation value. That must be one of predefined values. Unknown page templated selected. Unsupported paper units. Unsupported layout units. Export options can be used with single input file only. Run the program in a test mode. The program this mode load a single pattern file and silently quit without showing the main window. The key have priority before key '%1'. Test option can be used with single input file only. The base filename of exported layout files. Use it to enable console export mode. The base filename of layout files The path to output destination folder. The destination folder Set size value a pattern file, that was opened with standard measurements (export mode). Valid values: %1cm. The size value Set height value a pattern file, that was opened with standard measurements (export mode). Valid values: %1cm. The height value Page width in current units like 12.0 (cannot be used with "%1", export mode). Page height in current units like 12.0 (cannot be used with "%1", export mode). Page height/width measure units (cannot be used with "%1", export mode): Invalid gradation size value. Invalid gradation height value. Pattern making program. Pattern file. Ignore margins printing (export mode). Set all margins to 0. Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Shift length must be used together with shift units. Gap width must be used together with shift units. Left margin must be used together with page units. Right margin must be used together with page units. Top margin must be used together with page units. Bottom margin must be used together with page units. The path to output destination folder. By default the directory at which the application was started. Page height/width measure units (cannot be used with "%1", export mode). Valid values: %2. Ignore margins printing (export mode). Disable value keys: "%1", "%2", "%3", "%4". Set all margins to 0. Page left margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. Page right margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. Page top margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. Page bottom margin in current units like 3.0 (export mode). If not set will be used value from default printer. Or 0 if none printers was found. Value will be ignored if key "%1" is used. Rotation in degrees (one of predefined, export mode). Default value is 180. 0 is no-rotate. Valid values: %1. Each value show how many times details will be rotated. For example 180 mean two times (360/180=2) by 180 degree. Unite pages if possible (export mode). Maximum value limited by QImage that supports only a maximum of 32768x32768 px images. Save length of the sheet if set (export mode). The option tells the program to use as much as possible width of sheet. Quality of a layout can be worse when this option was used. Shift layout length measured in layout units (export mode). The option show how many points along edge will be used in creating a layout. The layout gap width x2, measured in layout units (export mode). Set distance between details and a detail and a sheet. Sets layout groupping cases (export mode): %1. Run the program in a test mode. The program in this mode loads a single pattern file and silently quit without showing the main window. The key have priority before key '%1'. Shift/Offset layout length measured in layout units (export mode). The option show how many points along edge will be used in creating a layout. Shift/Offset length Shift/Offset length must be used together with shift units. Number corresponding to output format (default = 0, export mode): Number corresponding to page template (default = 0, export mode): Disable high dpi scaling. Call this option if has problem with scaling (by default scaling enabled). Alternatively you can use the %1 environment variable. Export dxf in binary form. Export text as paths. Export only details. Export details as they positioned in the details mode. Any layout related options will be ignored. Export only details that match a piece name regex. The name regex Export to csv with header. By default disabled. Specify codec that will be used to save data. List of supported codecs provided by Qt. Default value depend from system. On Windows, the codec will be based on a system locale. On Unix systems, the codec will might fall back to using the iconv library if no builtin codec for the locale can be found. Valid values for this installation: Codec name Specify csv separator character. Default value is '%1'. Valid characters: Separator character Calling this command enable exporting final measurements. Specify path to csv file with final measurements. The path must contain path to directory and name of file. It can be absolute or relatetive. In case of relative path will be used current working directory to calc a destination path. Path to csv file Number corresponding to layout page template (default = 0, export mode): Ignore printer margins (export mode). Use if need full paper space. In case of later printing you must account for the margins himself. Number corresponding to tiled pdf page template (default = 0, export mode with tiled pdf format): Tiled page left margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. The left margin Tiled page right margin in current units like 3.0 (export mode). If not set will be used default value 1 cm. The right margin Tiled page top margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. The top margin Tiled page bottom margin in current units like 3.0 (export mode). If not set will be used value default value 1 cm. The bottom margin Set tiled page orienatation to landscape (export mode). Default value if not set portrait. Cannot use pageformat and page explicit size together. Tiled left margin must be used together with page units. Tiled right margin must be used together with page units. Tiled top margin must be used together with page units. Tiled bottom margin must be used together with page units. Page measure units (export mode). Valid values: %1. Set size value for pattern file, that was opened with multisize measurements (export mode). Valid values: %1cm. Set height value for pattern file, that was opened with multisize measurements (export mode). Valid values: %1cm. VCommonSettings measurements individual multisize templates label templates VContainer Can't find object Can't cast object Can't find object. Type mismatch. Number of free id exhausted. Can't create a curve with type '%1' Can't cast object. VCubicBezierPath Not enough points to create the spline. This spline does not exist. VDomDocument Can't convert toUInt parameter Can't convert toBool parameter Got empty parameter Can't convert toDouble parameter Can't open file %1: %2. Can't open schema file %1: %2. Could not load schema file. Validation error file %3 in line %1 column %2 Parsing error file %3 in line %1 column %2 Couldn't get node Got wrong parameter id. Need only id > 0. This id is not unique. Could not copy temp file to document file Could not remove document file Could not load schema file '%1'. Fail to write Canonical XML. <empty> VDrawTool Edit wrong formula Options אפשרויות Delete למחוק Show label Add to group Remove from group VException Exception: %1 VFormula Error VFormulaProperty Value Formula VLayoutPiece Piece %1 doesn't have shape. VMeasurements Can't find measurement '%1' The measurement name is empty! VNodePoint Options In layout Show label Exclude Delete Forbid flipping Force flipping VPE::VBoolProperty True False VPE::VFileEditWidget Directory Open File VPattern Error no unique id. Error parsing file. Error can't convert value. Error empty parameter. שגיאה חסר פרמטר. Error wrong id. Error parsing file (std::bad_alloc). Error creating or updating detail Error creating or updating single point Error creating or updating point of end line Error creating or updating point along line Error creating or updating point of shoulder Error creating or updating point of normal Error creating or updating point of bisector Error creating or updating point of lineintersection Error creating or updating point of contact Error creating or updating modeling point Error creating or updating height Error creating or updating triangle Error creating or updating point of intersection Error creating or updating cut spline point Error creating or updating cut spline path point Error creating or updating cut arc point Error creating or updating point of intersection line and axis Error creating or updating point of intersection curve and axis Error creating or updating line Error creating or updating simple curve Error creating or updating curve path Error creating or updating modeling simple curve Error creating or updating modeling curve path Error creating or updating simple arc Error creating or updating modeling arc Error creating or updating union details Error creating or updating point of intersection arcs Error creating or updating point of intersection circles Error creating or updating point from circle and tangent Error creating or updating point from arc and tangent Error creating or updating true darts Wrong tag name '%1'. Unknown point type '%1'. Unknown spline type '%1'. Unknown arc type '%1'. Unknown tools type '%1'. Error not unique id. Error creating or updating point of intersection curves Error creating or updating simple interactive spline Error creating or updating interactive spline path Error creating or updating cubic bezier curve Error creating or updating cubic bezier path curve Error creating or updating operation of rotation Unknown operation type '%1'. Error creating or updating operation of flipping by line Error creating or updating operation of flipping by axis Error creating or updating operation of moving Error creating or updating point of line intersection Error creating or updating simple elliptical arc Unknown elliptical arc type '%1'. Error creating or updating modeling elliptical arc Detail Unnamed path Error creating or updating a piece path Error creating or updating pin point Error creating or updating place lavel VPatternConverter Unexpected version "%1". Error restoring backup file: %1. VPoster Grid ( %1 , %2 ) Page %1 of %2 Sheet %1 of %2 VSettings patterns layouts VSplinePath Not enough points to create the spline. This spline does not exist. Can't cut spline path with one point VTextManager Cut %1 on %2%3 on Fold on Fold Cut cut on fold VToolAlongLine Length Angle Label VToolArc Length Radius Start angle End angle Label VToolArcWithLength Length Radius Start angle End angle Label VToolBasePoint Label VToolCurveIntersectAxis Error calculating point '%1'. There is no intersection with curve '%2' and axis through point '%3' with angle %4° VToolCut Length VToolCutArc Arc length start angle end angle radius label VToolCutSpline Curve length label VToolCutSplinePath Curve length label VToolDetail Options אפשרויות Delete למחוק move pattern piece label resize pattern piece label rotate pattern piece label move pattern info label resize pattern info label rotate pattern info label In layout move grainline resize grainline rotate grainline VToolDoublePoint Label VToolEllipticalArc Length Radius Start angle End angle Label Rotation VToolFlippingByAxis Origin point VToolFlippingByLine First line point Second line point VToolHeight Length Angle Label VToolLine Length Angle VToolLineIntersect Label Error calculating point '%1'. Lines (%2;%3) and (%4;%5) have no point of intersection VToolLineIntersectAxis Length Angle Label Error calculating point '%1'. Line (%2;%3) doesn't have intersection with axis through point '%4' and angle %5° VToolLinePoint Length Angle Label VToolMove Rotation angle Length Center point נקודת מרכז Angle Rotation origin point VToolOptionsPropertyBrowser Base point Point label תווית הנקודה Position Point at distance and angle Line type Length אורך Angle Point at distance along line Arc Radius רדיוס First angle Second angle Point along bisector Cut arc tool Tool for segmenting a curve Tool segment a pathed curve Perpendicular point along line Line between points Point at line intersection Point along perpendicular Additional angle degrees Point at intersection of arc and line Tool to make point from x & y of two other points Special point on shoulder Curve tool Curve factor Tool for path curve Tool triangle Point intersection line and axis Line color Color Point intersection curve and axis First point נקודה ראשונה Second point נקודה שנייה Arc with given length True darts Point 1 label Point 2 label Tool to make point from intersection two arcs Take Tool to make point from intersection two circles First circle radius Second circle radius Tool to make point from circle and tangent Circle radius Tool to make point from arc and tangent Highest point Lowest point Leftmost point Rightmost point Tool to make point from intersection two curves Vertical correction Horizontal correction Name C1: angle C1: length C2: angle C2: length Cubic bezier curve Tool cubic bezier curve Tool rotation Suffix Vertical axis Horizontal axis Tool move Tool flipping by line Tool flipping by axis Axis type Elliptical arc Point label: Position: Base point: Line type: Line color: Length: Angle: First point: Second point: Center point: Radius: First angle: Second angle: Color: Third point: Point 1 label: Point 2 label: First base point: Second base point: First dart point: Arc: Curve: First line point: Second line point: First line (first point): First line (second point): Second line (first point): Second line (second point): Additional angle degrees: Center of arc: Top of the line: End of the line: X: vertical point: Y: horizontal point: First arc: Second arc: Take: Center of the first circle: Center of the second circle: First circle radius: Second circle radius: First curve: Second curve: Vertical correction: Horizontal correction: Center of the circle: Tangent point: Circle radius: Name: C1: angle: C1: length: C2: angle: C2: length: First point of axis: Second point of axis: Axis point: Suffix: Origin point: Axis type: Rotation angle: Fourth point: Pen style: Approximation scale: Rotation origin point: VToolPointFromArcAndTangent Error calculating point '%1'. Tangent to arc '%2' from point '%3' cannot be found VToolPointFromCircleAndTangent Error calculating point '%1'. Tangent to circle with center '%2' and radius '%3' from point '%4' cannot be found VToolPointOfContact Length Angle Label Error calculating point '%1'. Circle with center '%2' and radius '%3' doesn't have intersection with line (%4;%5) VToolPointOfIntersectionArcs Error calculating point '%1'. Arcs '%2' and '%3' have no point of intersection VToolPointOfIntersectionCircles Error calculating point '%1'. Circles with centers in points '%2' and '%3' have no point of intersection VToolPointOfIntersectionCurves Error calculating point '%1'. Curves '%2' and '%3' have no point of intersection VToolRotation Origin point Rotation angle VToolSeamAllowance Current seam allowance move pattern piece label resize pattern piece label rotate pattern piece label move pattern info label resize pattern info label rotate pattern info label move grainline resize grainline rotate grainline Options In layout Delete apply save detail options multi deletion Forbid flipping Force flipping VToolShoulderPoint Length Angle Label VToolTriangle Error calculating point '%1'. Point of intersection cannot be finded VToolUnionDetails union details United detail VTranslateVars Bunka System name Bunka Fashion College Author name Fundamentals of Garment Design Book name Barnfield and Richard System name Jo Barnfield and Andrew Richards Author name Pattern Making Primer Book name Friendship/Women System name Elizabeth Friendship Author name Creating Historical Clothes - Pattern Cutting from the 16th to the 19th Centuries Book name Morris, K. System name Karen Morris Author name Sewing Lingerie that Fits Book name Castro System name Lucia Mors de Castro Author name Patternmaking in Practic Book name Kim & Uh System name Injoo Kim and Mykyung Uh Author name Apparel Making in Fashion Design Book name Waugh System name Norah Waugh Author name Corsets and Crinolines Book name Grimble System name Frances Grimble Author name Fashions of the Gilded Age Book name Thornton's International System System name ed. R. L. Shep Author name The Great War: Styles and Patterns of the 1910s Book name Hillhouse & Mansfield System name Marion S. Hillhouse and Evelyn A. Mansfield Author name Dress Design: Draping and Flat Pattern Making Book name Pivnick System name Esther Kaplan Pivnick Author name How to Design Beautiful Clothes: Designing and Pattern Making Book name Minister & Son System name Edward Minister & Son, ed. R. L. Shep Author name The Complete Guide to Practical Cutting (1853) Book name Strickland System name Gertrude Strickland Author name A Tailoring Manual Book name Loh & Lewis System name May Loh and Diehl Lewis Author name Patternless Fashion Design Book name Morris, F. R. System name F. R. Morris Author name Ladies Garment Cutting and Making Book name Mason System name Gertrude Mason Author name Gertrude Mason's Patternmaking Book Book name Kimata System name K. Kimata Author name K.Kimata's Simplified Drafting Book for Dressmaking Book name Master Designer System name The Master Designer (Chicago, IL) Author name Master Designer's System of Designing, Cutting and Grading Book name Kopp System name Ernestine Kopp, Vittorina Rolfo, Beatrice Zelin, Lee Gross Author name How to Draft Basic Patterns Book name Ekern System name Doris Ekern Author name Slacks Cut-to-Fit for Your Figure Book name Doyle System name Sarah J. Doyle Author name Sarah's Key to Pattern Drafting Book name Shelton System name Karla J. Shelton Author name Design and Sew Jeans Book name Lady Boutique System name Lady Boutique Author name Lady Boutique magazine (Japan) Book name Rohr System name M. Rohr Author name Pattern Drafting and Grading: Women's nd Misses' Garment Design Book name Moore System name Dorothy Moore Author name Dorothy Moore's Pattern Drafting and Dressmaking Book name Abling System name Bina Abling Author name Integrating Draping, Drafting and Drawing Book name Fukomoto System name Sue S. Fukomoto Author name Scientific Pattern Drafting as taught at Style Center School of Costume Design, Dressmaking and Millinery Book name Dressmaking International System name Dressmaking International Author name Dressmaking International magazine (Japan) Book name Erwin System name Mabel D. Erwin Author name Practical Dress Design Book name Gough System name E. L. G. Gough Author name Principles of Garment Cutting Book name Allemong System name Elizabeth M. Allemong Author name European Cut Book name McCunn System name Donald H. McCunn Author name How to Make Your Own Sewing Patterns Book name Zarapkar System name Shri K. R. Zarapkar and Shri Arvind K. Zarapkar Author name Zarapkar System of Cutting Book name Kunick System name Philip Kunick Author name Sizing, Pattern Construction and Grading for Women's and Children's Garments Book name Handford System name Jack Handford Author name Professional Patternmaking for Designers: Women's Wear, Men's Casual Wear Book name Davis System name R. I. Davis Author name Men's 17th & 18th Century Costume, Cut & Fashion Book name MacLochlainn System name Jason MacLochlainn Author name The Victorian Tailor: An Introduction to Period Tailoring Book name Joseph-Armstrong System name Helen Joseph-Armstrong Author name Patternmaking for Fashion Design Book name Supreme System System name Frederick T. Croonberg Author name The Blue Book of Men's Tailoring, Grand Edition of Supreme System for Producing Mens Garments (1907) Book name Sugino System name Dressmaking Author name Pattern Drafting Vols. I, II, III (Japan) Book name Centre Point System System name Louis Devere Author name The Handbook of Practical Cutting on the Centre Point System Book name Aldrich/Men System name Winifred Aldrich Author name Metric Pattern Cutting for Menswear Book name Aldrich/Women System name Metric Pattern Cutting for Women's Wear Book name Kershaw System name Gareth Kershaw Author name Patternmaking for Menswear Book name Gilewska System name Teresa Gilewska Author name Pattern-Drafting for Fashion: The Basics Book name Lo System name Dennic Chunman Lo Author name Pattern Cutting Book name Bray System name Natalie Bray Author name Dress Pattern Designing: The Basic Principles of Cut and Fit Book name Knowles/Men System name Lori A. Knowles Author name The Practical Guide to Patternmaking for Fashion Designers: Menswear Book name Friendship/Men System name Pattern Cutting for Men's Costume Book name Brown System name P. Clement Brown Author name Art in Dress Book name Mitchell System name Jno. J. Mitchell Author name "Standard" Work on Cutting (Men's Garments) 1886: The Art and Science of Garment Cutting Book name GOST 17917-86 System name Ministry of consumer industry of the USSR Author name Standard figure boys Book name Eddy System name Josephine F. Eddy and Elizabeth C. B. Wiley Author name Pattern and Dress Design Book name Knowles/Women System name Practical Guide to Patternmaking for Fashion Designers: Juniors, Misses, and Women Book name American Garment Cutter System name None System name Valentina team Author name Valentina's internal standard Book name Line_ Left symbol _ in name AngleLine_ Left symbol _ in name Arc_ Left symbol _ in name Spl_ Left symbol _ in name SplPath Do not add symbol _ to the end of name RadiusArc_ Left symbol _ in name Angle1Arc_ Left symbol _ in name Angle2Arc_ Left symbol _ in name Angle1Spl_ Left symbol _ in name Angle2Spl_ Left symbol _ in name Angle1SplPath Do not add symbol _ to the end of name Angle2SplPath Do not add symbol _ to the end of name sin sine function cos cosine function tan tangens function asin arcus sine function acos arcus cosine function atan arcus tangens function sinh hyperbolic sine function cosh hyperbolic cosine tanh hyperbolic tangens function asinh hyperbolic arcus sine function acosh hyperbolic arcus tangens function atanh hyperbolic arcur tangens function log2 logarithm to the base 2 log10 logarithm to the base 10 log logarithm to the base 10 ln logarithm to base e (2.71828...) exp e raised to the power of x sqrt square root of a value sign sign function -1 if x<0; 1 if x>0 rint round to nearest integer abs absolute value min min of all arguments max max of all arguments sum sum of all arguments avg mean value of all arguments fmod Returns the floating-point remainder of numer/denom (rounded towards zero) cm centimeter mm millimeter in inch Line_ Left symbol _ in the name AngleLine_ Left symbol _ in the name Arc_ Left symbol _ in the name Spl_ Left symbol _ in the name SplPath Do not add symbol _ to the end of the name RadiusArc_ Left symbol _ in the name Angle1Arc_ Left symbol _ in the name Angle2Arc_ Left symbol _ in the name Angle1Spl_ Left symbol _ in the name Angle2Spl_ Left symbol _ in the name Angle1SplPath Do not add symbol _ to the end of the name Angle2SplPath Do not add symbol _ to the end of the name Seg_ Segment. Left symbol _ in the name CurrentLength Do not add space between words acosh hyperbolic arcus cosine function size placeholder height placeholder C1LengthSpl_ Left symbol _ in the name C2LengthSpl_ Left symbol _ in the name C1LengthSplPath Do not add symbol _ to the end of the name C2LengthSplPath Do not add symbol _ to the end of the name CurrentSeamAllowance Do not add space between words degTorad converts degrees to radian radTodeg converts radian to degrees sin sine function working with radians cos cosine function working with radians tan tangens function working with radians asin arcus sine function working with radians acos arcus cosine function working with radians atan arcus tangens function working with radians sinh hyperbolic sine function working with radians cosh hyperbolic cosine working with radians tanh hyperbolic tangens function working with radians asinh hyperbolic arcus sine function working with radians acosh hyperbolic arcus cosine function working with radians atanh hyperbolic arcur tangens function working with radians sinD sine function working with degrees cosD cosine function working with degrees tanD tangens function working with degrees asinD arcus sine function working with degrees acosD arcus cosine function working with degrees atanD arcus tangens function working with degrees M_ Left symbol _ in the name Increment_ Left symbol _ in the name ElArc_ Left symbol _ in the name Radius1ElArc_ Left symbol _ in the name Radius2ElArc_ Left symbol _ in the name Angle1ElArc_ Left symbol _ in the name Angle2ElArc_ Left symbol _ in the name date placeholder time placeholder patternName placeholder patternNumber placeholder author placeholder customer placeholder pExt placeholder pFileName placeholder mFileName placeholder mExt placeholder pLetter placeholder pAnnotation placeholder pOrientation placeholder pRotation placeholder pTilt placeholder pFoldPosition placeholder pName placeholder pQuantity placeholder mFabric placeholder mLining placeholder mInterfacing placeholder mInterlining placeholder wCut placeholder wOnFold placeholder userMaterial placeholder r2cm round to up to 1 decimal csrCm cut, split and rotate modeling operation. Takes cm units. csrInch cut, split and rotate modeling operation. Takes inch units. RotationElArc_ Left symbol _ in the name VVITConverter Unexpected version "%1". Error restoring backup file: %1. VVSTConverter Unexpected version "%1". Error restoring backup file: %1. VWidgetDetails Form Unnamed Select all Select none select all details select none details Invert selection invert selection VWidgetGroups Form Rename Delete VisToolCubicBezierPath <b>Curved path</b>: select seven or more points <b>Curved path</b>: select seven or more points, <b>Enter</b> - finish creation <b>Curved path</b>: select more points for complete segment VisToolCurveIntersectAxis <b>Intersection curve and axis</b>: angle = %1°; <b>Shift</b> - sticking angle, <b>Enter</b> - finish creation VisToolEndLine <b>Point at distance and angle</b>: angle = %1°; <b>Shift</b> - sticking angle, <b>Enter</b> - finish creation <b>Point at distance and angle</b>: angle = %1°, length = %2%3; <b>Shift</b> - sticking angle, <b>Enter</b> - finish creation VisToolLineIntersectAxis <b>Intersection line and axis</b>: angle = %1°; <b>Shift</b> - sticking angle, <b>Enter</b> - finish creation VisToolMove Length = %1%2, angle = %3°, <b>Shift</b> - sticking angle, <b>Mouse click</b> - finish creation Length = %1%2, angle = %3°, <b>Shift</b> - sticking angle, <b>Mouse click</b> - finish selecting a position Length = %1%2, angle = %3°, rotation angle = %4°, <b>Shift</b> - sticking angle, <b>%5</b> - change rotation origin point, <b>Mouse click</b> - finish creating VisToolRotation Rotating angle = %1°, <b>Shift</b> - sticking angle, <b>Mouse click</b> - finish creation VisToolSpline Use <b>Shift</b> for sticking angle! VisToolSplinePath <b>Curved path</b>: select three or more points <b>Curved path</b>: select three or more points, <b>Enter</b> - finish creation Use <b>Shift</b> for sticking angle! mNoisyHandler DEBUG: WARNING: CRITICAL: FATAL: INFO: Warning. Critical error. Fatal error. Information. Warning Critical error Fatal error Information vNoisyHandler DEBUG: WARNING: CRITICAL: FATAL: INFO: Warning. Critical error. Fatal error. Information. Warning Critical error Fatal error Information